Explore How To Reset ADT Camera With Us
Generally, ADT security devices are the top choice for customers. However, users sometimes need to perform a hard reset on their CCTV for various reasons. Additionally, learning how to reset adt camera is necessary if you want to bring your CCTV back to its default settings. However, the single way to reset your ADT surveillance device is the Reset button.
Likewise, you can’t factory reset the ADT security system cameras using the web browser or the app methods. You just remove the device from the dashboard, but a reset is only possible through the button. Therefore, if you want to explore more about how to factory reset adt camera, walk through his concise guide.
Reasons to hard reset ADT security camera
Additionally, not a single reason is responsible for hard resetting an ADT security camera. Hence, before walking through how to reset adt camera, take a look at the list of the primary causes shared beneath:
- Buying or selling the CCTVs
- Persistent Connectivity issues
- Camera malfunctioning
- Corrupted firmware or fails to update
- Security concerns
- Inaccurate camera configuration
How to reset ADT camera using the button method?
Moreover, the only way to revert your surveillance device to its default settings is the Reset button. However, each category of the ADT camera has different timings for resetting. Therefore, we highlight two primary classes of CCTVs to perform a hard reset. Let’s have a look beneath to understand how to reset adt camera:
Command RC8326-V2/OC845 CCTV
- Initially, ensure your security device is powered on.
- Now, locate the Reset button on your ADT camera.
- After that, press this knob using any sharp object.
- Keep holding this button for 15 seconds, and after that, let the button go off.
- Finally, your device reverts to its default settings.
- Here, you learn how to factory reset adt camera efficiently.
ADT Pulse camera
- To start with, confirm that the CCTV device is turned on.
- Next, look for the Reset knob on your security device.
- Afterward, bring any sharp object and press the Reset button.
- Grip this button for 20 seconds and then release.
- In the end, your camera gets back to its original settings.
- Now, how to reset adt camera process ends successfully.
All in all, you learn the reset process for your ADT surveillance device using the reset button.
Pro Tip: A few of the ADT Pulse models need 10 seconds for a hard reset. So, it is recommended to consider the user manual while resetting your camera.
How to reset adt doorbell camera?
Additionally, the ADT doorbells are easy to access and use. Similarly, reset is also quite simple by using the tiny hole reset button. Likewise, to understand the complete wireless or wired doorbell cameras, follow the steps mentioned below:
- Primarily, turn on your ADT doorbell.
- Now, locate the Reset button inside the flip cover on the buzzer’s backside.
- Next, take a paperclip or a pinpoint and press the Reset button.
- Keep hold this knob for 15 seconds and then let it go off when LEDs start flashing or changing color.
- Lastly, your doorbell camera reverts to its default settings.
- Now, you understand how to reset adt doorbell camera easily.
What are the quick steps to delete ADT CCTV from the app?
Commonly, deleting a security camera from the application is very convenient, but remember you can’t reset it using the application. You can only use the reset button to revert it to its original settings, and you learned how to reset adt camera in the previous section. Likewise, after factory resetting your CCTV, if you want to delete it from the app dashboard, then proceed with the steps mentioned below:
- First & foremost, check that your security camera is powered on.
- Confirm that your smartphone and cameras are linked to the same network.
- Next, launch the ADT Control camera from your smartphone.
- After that, enter the valid user details on the login window to access the admin panel.
- Now, you land on the home dashboard of the camera.
- Here, explore the main Menu and look for the “Video tab.”
- Further, click on the “Video>choose Settings>Video Device.”
- Drop down the “Video Device” menu and tap on Video Device Info.
- On the “Video Device Information” page, note down the MAC address of the CCTV that you want to remove from the application.
- Hereon, select the “Delete this Video Device” option in the bottom left corner.
- In the end, your ADT camera is successfully removed from the application.
Bottom Line
All things considered, this brief guide will walk you through how to reset adt camera process. In addition, you will find the various ADT security camera categories reset using the button method. Along with this, you will also explore the doorbell reset and how to remove the CCTV from the application. If you still seek expert help, drop us a line in the given chat box.